SUNLU类ABS光敏树脂

SUNLU类ABS光敏树脂

颜色分类:
黑色
白色
灰色(浅灰)
深灰
肤色
橙色
绿色
透明色
透明蓝
透明红
透明绿
薄荷绿
柠檬黄
香芋紫
天空蓝
樱花粉
容量:
500g
1000g
2000g
树脂特性:
  • 类ABS树脂

  • 低收缩

  • 高精度

  • 高兼容性

  • 快速固化

树脂介绍:

成型好,气味低,收缩低;拉伸、弯曲和韧性综合性能都表现比较好,可以打孔可攻丝;坚韧性能明显优于刚性标准树脂,具体较好的韧性,有一定的耐摔性能,模型掉落不容易碎;耐老化性能也较好;成型性能类似于ABS,应用于需要一定坚韧的手办模型跟工程样件上,性价比高。

材料属性详情

耗材属性数值测试标准
液体密度1.04-1.14 g/cm3FA1004J liquid specific gravity balance
粘度200-400 mPa.sNDJ-8S Rotational Viscometer (25°C)
邵氏硬度75-80 DASTM D2240
固体密度1.16-1.22 g/cm3FA1004J liquid specific gravity balance
缺口冲击强度60 J/mASTM D 256
抗弯强度36 MPaASTM D790
弯曲模量1070 MPaASTM D790
拉伸强度34 MPaASTM D638
弹性模量1020 MPa/
断裂伸长率20% ASTM D790
撕裂强度 /
热变形温度50 ℃ ASTM D648
Shrinkage6-8 % ASTM D955
当前树脂性能数据由材料厂商提供,CHITUBOX不对数据真实性负责

后处理步骤

先用浓度95%以上的乙醇或异丙醇清洗干净后用紫外光二次固化

材料详情

Packing Listing

  • A bottle of 1KG resin & Resin filters for 3d printer

Resin Storage Tips

  1. Please store away from sunlight, as sunlight contains ultraviolet rays which will cure the photosensitive resin.
  2. It is recommended to store the resin in a cool dry place at 15-35°C. Resin viscosity will become higher when the temperature gets lower.
  3. Please keep it sealed to avoid dust or moisture affecting the print quality.

Cautions

  • Usage period: use within one year for best results.
  • This product is not edible, if swallowed by mistake, please seek medical attention immediately.
  • Please shake well before use, it is recommended to shake upside down for three times.
  • Wear gloves, protective masks and other protective equipment when using photosensitive resin.
  • Please clean the printed resin model with high-concentration alcohol for about 30S. It is recommended to use 95% concentration of alcohol or more to clean the printed mode
  • In order to obtain better results, the cleaned(alcohol has dried) model can be secondarily cured.
  • To avoid contamination of the resin, do not pour the resin in the container into the unused resin.