Advanced
Effects of Layer Height on SLA/DLP/LCD 3D Printing
This is known as the ladder effect, which becomes more obvious on surfaces with greater curvature.
How Airtight Chamber Affect Prints
During the gradual investigation, we found that the most influential factor to the measurement was vacuum seal drawing.
Hollowed Part Being Broken After A Period of Time
For some hollowed parts, after putting for a period of time, it may be cracked or even broken.
A Brief Overview of Thermal Stress in Resin 3D Printing
Introduction to thermal stress, its effects and solutions
Obtain the Parameters of Photosensitive Resin in SLA/DLP/LCD 3D Printing
When using a new photosensitive resin, knowing its suitable 3D printing parameters is a priority before printing.
Storage And Curing of Photopolymer Resin
Frankly, resin is not easy to get along with. It has its temper so it requires great care to keep it “alive” and handle it.
How To Strengthen 3D Printed Parts in SLA/DLP/LCD?
Part strength ensures that the printed part is strong and durable during the use or storage which will not break over time.
Verification of the Effect of Light Source Intensity on Printing Accuracy
The combination of the three will compensate for the pixel grain.
All You Need to Know about Failed Printing
Only get support and raft structures on the build plate.